Introduction

...

This is used for the communucation from the CoreOne Application services to the system connectors.
The certificate must be installed on the server, where the CoreOne Application service and where the system connectors are running.

...

Manual

Step 1 - Open MMC and add a Snap-in

...

Click on "File" and than click on "Add/Remove Snap-in" or with the keyboard shortcut ctrl+M
Open "Certificates" by double clicking it → Let the computer account to manage the certificates
Install the certificates on the local computer
To open the Snap-in just click "OK" at the end of these steps

Image Added Image Added Image Added Image Added

Step 2 - Install the certificate

...

To add the certificate you have to enter the password of the certificate, which was generated at the export. After you have done this, you need to choose the folder, where you want to add the certificate. In the normal case this is the folder "Personal". Click "Next" to continue.

To complete the changes click "Finish". Confirm all your changes by clicking "OK" in the popup window that will open.

Image Added

Step 3 - Proof the recently added certificate

Navigate to the certificate, which you added before, in the certificate store. Double click on the certificate and check the path and the status of the certificate.

Image Added

Step 4 - Service User rights

Navigate to the certificate and do a right click on it "→ All Tasks → Manage private key" to manage the private key. Give full control to the service user on the certificate. Apply these changes with "OK"

Image Added

Step 5 - Optional

Export public certificate to install it on an other server.

Install the exported public certificate on all communication-partners like: Web-Server, system connector, aso.

Do the same on all communication-partners. Export their public certificate and add it on the server.

1	MMC Start → MMC + R \| mmc
2	Add Certificate Snap-In... Neue Snap-in laden über File Add/Remobe Snap-in.. oder Ctrl+M Load a new snap-in by clicking "Add/remove Snap-in" or Ctrl + M (keyboard shortcut) Certificates Double click "Certificates"
3	Account Choose "Computer account"
4	Local Computer Click "Finish"
5	Add Certificate Snap-In Confirm by clicking "Ok"
6	Install certificates Navigate to "Personal" → certificates import Right click → All Tasks → Import
7	Certificate Import Click Next
8	File Import Choose the certificate you want to add by clicking "Browse..."
9	File Import Indicate the password for the private key. Confirm the password by clicking "next"
10	Cerificate Store Choose the certificate store, where the certificate will be saved. After that you can click "Next"
11	Completing the Import Wizard Click finish
12	Import was successful Confirm the changes with "OK"
13	Control the certificate Double click on the certificate Certification Path → Certificate status
14	Service User rights Right click on the certificate → All Tasks → Manage Private Keys
15	Service Account auf das eingelesene Zertifikat berechtigen: Full Control Read Apply → OK
16	Optional: Export public certificate to install it on an other server. Install the exported public certificate on all communication-partners like: Web-Server, system connector, aso. Do the same on all communication-partners. Export their public certificate and add it on the server.